[Elecraft] K3S - N1MM+ CW Message Transmit Decode Question

[Jim Brown]

On 8/18/2017 1:05 PM, Richard Ferch wrote:
> Second, the only transmitted CW the K3/K3S can decode is keying from the
> paddle input to the radio's internal CW keyer.

And if we want to program K3 or K3S memories, we must either send with a 
paddle connected to the K3/K3S keyer port or program them using the 
K3/K3S Utility. That's one reason that, even though my primary paddle 
feeds a WinKey compatible keyer in my YCCC SO2R box, I always have 
separate paddles connected directly to both radios in my SO2R setup.

73, Jim K9YC