[Elecraft] RX antenna protection

[Bob McGraw K4TAX]

See page 63 of the manual.  Also page 70 under Receive.    "*HI RFI* 
warning:"

RFI DET - *NOR *enables detection of high RFI at the antenna in receive 
mode.  (see HI RFI warning. *Troubleshooting*). Set to OFF to disable 
the warning.

73
Bob, K4TAX
K3S s/n 10163


On 8/15/2017 9:50 AM, john at kk9a.com wrote:
> Great question! I asked the same thing once and never got an answer so to
> be safe I either short the RX antenna during transmit or if SO2R I use DXE
> receiver guards. It would be nice if the K3S had a similar built in
> protector.
>
> John KK9A
>
> W1PEF wrote
> Mon Aug 14 21:48:29 EDT 2017
>
> I am considering a Rx antenna but my property is small and concerned about
> strong signals over powering the receiver. Does the K3S have built-in
> protection?
> Does anyone use a loop receive antenna or BOG antenna ... would like some
> recommendations from actual users of receive antennas.
> Have the complete K-Line and would like to improve my ability to hear.
> Thanks for any advice...
> Paul
> W1PEF
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>