[Elecraft] Remote computer won't communicate with K3 after re-installing Windows 10

[Clay Autery]

My K3s is using an FTDI driver right this minute for BOTH Win4K3Suite
and/or Elecraft K3s Config software...  COM7 by the way... not that that
really matters.

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 8/14/2017 12:27 PM, Jim Reisert AD1C wrote:
>> On my Win 10 machine I can tell by going to Device Manager, Ports, selecting
>> the specific port in question, then right clicking and going to Properties.
>> There, on all of my USB connections, it says "Manufacturer: FTDI".    Hope
>> that will help.
> Thanks, Bill, but I don't know which interface cable he has - it could
> be Prolific or FTDI,  depending on how old it is.  Because there are
> two COM ports not associated with the microHAM device (the generic
> "USB" and the one that has a Silicon Labs driver), I guess I have to
> assume that the generic USB COM port is the one that the K3 needs.
> I'll see what type of device it is, and if I can find the right driver
> for it.
>
> - Jim
>