[Elecraft] A Macro to switch data modes

[Dave Cole]

Hi Peter,

Take a look at:

http://nk7z.net/adding-external-keypad-k3/

That is a short article on using an external keypad on a K3/P3 
combination, giving you one button macro launching capabilities.

About halfway down is a link to a spreadsheet of macros.  Download the 
spreadsheet, and there is a macro there to move a K3/P3 to DATA A mode, 
which I assume is the correct mode for FT8.

Here is the Macro in the event you don't want to look at the article:

MD6;DT0;IS 1500;BW0400;

Here is the breakout of what each element does:
MD6:		Changes to DATA
DT0:		Sets DATA A
IS 1500:	Sets the IF shift to 1500
BW0400:		Sets the band width to 4K

Hope this helps...  I am sure there are many ways to do this
.
73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 08/07/2017 05:46 AM, Peter Chamalian wrote:
> Has anyone created a macro to change the K3S from RTTY to FT-8?
> 
>   
> 
>   
> 
> Pete, W1RM
> 
>   
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
>