[Elecraft] PX3 Signal While Transmitting

[David Anderson]

Try the internal keyer, just as a test, I think I recall that then the PX3 may freeze totally during semi break in keying. (I never used full break in because I was using transverters with sequenced relays).

I recall being confused as to what was different one day when I saw what you are seeing and it was because I had changed from external to internal keyer or vice versa.

73 from David GM4JJJ

> On 3 Aug 2017, at 17:54, Roger Meadows <ae4rm at ae4rm.com> wrote:
> 
> Noise blankers are off and it is an external key. 
>> On Thu, Aug 3, 2017 at 12:46 PM David Anderson <gm4jjj at yahoo.co.uk> wrote:
>> I don't have my PX3 beside me now, but I recall that the PX3 acts differently between using an external keyer and the internal keyer of the KX3, one freezes the PX3 all the time you are transmitting in semi break in, the other doesn't.
>> 
>> The other thing that sometimes causes spurious signals to appear on the PX3 is if the PX3 NB level is too high (not the KX3 NB level).
>> 
>> 73 from David GM4JJJ
>> 
>> > On 3 Aug 2017, at 16:53, Roger Meadows <ae4rm at ae4rm.com> wrote:
>> >
>> > When I'm sending code, I noticed that there is a signal showing up just to
>> > the right of the frequency I'm on. It goes away when I'm done
>> > transmitting.  Here is an example ...  https://youtu.be/zQ_VWCmKvOw
>> >
>> > Thanks for your input.
>> >
>> > 73,
>> > Roger Meadows
>> > AE4RM
>> > ______________________________________________________________
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> > Message delivered to gm4jjj at yahoo.co.uk
>>