[Elecraft] Audio on K3

[Ted Bryant]

A Long shot - -

Is the radio on "LSB" or "USB"?  If you're listening on 20m it should be in
the USB mode.  Is it?

Ted W4NZ


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of louis
a. ives
Sent: Sunday, April 30, 2017 6:32 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] Audio on K3

I powered up my K3 and discovered that the audio was very distorted.  It
sounds as if everyone is off frequency and no amount of tuning will clear it
up. I was using 20 meter SB and it is the same on all other frequencies
except 2 meter.  I checked all settings that I use and nothing has changed.
I had no problem the night before and problem was found on powering up the
radio today. I also use KPA-500 and KTA-500 with this setup.  I also checked
and it is the same on both receivers. This unit was sent to Elecraft to be
checked over and aligned about 3 months ago and has been working great. This
radio has had all updates installed.  Anybody have information on where to
start looking for problem would greatly appreciated.
Thanks in advance
Buddy, KJ4ZSI



Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w4nz at comcast.net