[Elecraft] Audio on K3

[GWK]

I have sometimes had similar problems.  Usually resolved by reloading 
the latest configuration file - you did save one?

George, W3HBM


On 4/30/2017 6:32 PM, louis a. ives wrote:
> I powered up my K3 and discovered that the audio was very distorted.  It sounds as if everyone is off frequency and no amount of tuning will clear it up. I was using 20 meter SB and it is the same on all other frequencies except 2 meter.  I checked all settings that I use and nothing has changed. I had no problem the night before and problem was found on powering up the radio today. I also use KPA-500 and KTA-500 with this setup.  I also checked and it is the same on both receivers. This unit was sent to Elecraft to be checked over and aligned about 3 months ago and has been working great. This radio has had all updates installed.  Anybody have information on where to start looking for problem would greatly appreciated.
> Thanks in advance
> Buddy, KJ4ZSI
>
>
>
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gkidder at ilstu.edu