[Elecraft] Using Heil Pro 7 (HC-7) element with KX3

[David Rutledge]

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } I use the Pro 7 with my KX3 at home.  I ordered it with the iC element as I remember somewhere reading that it was necessary for use with the KX3.  No problems whatsoever.  A very comfortable headset.  The YL likes it too as she gets peace and quiet! 8-)
73,DavidAL5M


Sent from Yahoo Mail for iPad


On Sunday, April 30, 2017, 06:28, kevino z <z_kevino at hotmail.com> wrote:

After speaking to Bob Heil, he recommends the Pro 7 iC. Is it possible that all of the bad experiences described here were with the PRO 7 with the hC7 Dynamic element ? Just thinking folks had the wrong mic element...

-Kevin (KK4YEL)


No trees were killed in the sending of this message. However, a large number of electrons were terribly inconvenienced !

> On Apr 28, 2017, at 09:27, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> David,
> 
> The Heil HC-7 mic element has a very low output level.  Several others have had problems with it.  To make matters worse, Heil recommends that the K3 microphone gain range should be set to Low, when in fact it needs to be set to the High Gain range.
> 
> 73,
> Don W3FPR
> 
>> On 4/28/2017 8:30 AM, David Wall-NA4AE wrote:
>>  I recently tried to use a Heil Pro 7 (HC-7) element with my KX3.  Also, with the Heil adapter cable AD-1-KX3.  Re adjusted the Mic Bias (off) and Mic Btn (off).  Had very poor results.  Could not get the "Echo" out and a basic noise.  Tested extensively using another KX3 and a K3 as the test receiver.  We truly went thru a series of test changing CMP, and EQ. Yes we even cut the MON off.  Could not get the problems corrected with settings.  Sent it back to Heil and they tested it and said it was OK.  Being the good company that they are, they sent me a new system.  It did the same thing. So, I gave up and took it back to HRO.  They refunded me with no problem.  I then ordered a Heil "ProSet-ic" set up for the KX3 from Elecraft. So far it seems to work fine.  I don't know what the problem is that the Pro-7 (HC-7) wouldn't work with the KX3, but there is something that is not compatible with the HC-7 element.  I would have liked to have had a Pro-7 rather than the ProSet, b
> ut
>>  I couldn't get to work.  The Heil AD-1-KX3 cable is what you need to adapt the headset to the radio with a PL-59 (1/4")connection for a PTT switch (foot,hand etc). also has the TRR plug for the Mic connection.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to z_kevino at hotmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to al5m at rocketmail.com