[Elecraft] K3 P3 and KAT500

[Matt Zilmer]

BND MAP may be set to OFF for 10m on his K3.  See p54 of the Owner's Manual.

73,

matt W6NIA


On 4/27/2017 9:49 AM, Harry Yingst via Elecraft wrote:
> 28.400  is within the 10 meter band and your K3 should work just fine there (Mine does)
> That being said 28.4 may not be your best choice as it tends to be a calling frequency of sorts and even though they may not hear you you may hear them
>
>        From: KG7FYI <stanley at surcp.org>
>   To: elecraft at mailman.qth.net
>   Sent: Thursday, April 27, 2017 12:31 PM
>   Subject: Re: [Elecraft] K3 P3 and KAT500
>     
> Thanks for all the input.
> I hope you aren't getting the impression that I am preparing to be a loose
> cannon. We regularly carry on sets in anticipation of the type of
> emergencies the State is preparing for. Nonetheless my desire is to have as
> many options as possible available for our small community. We have been
> submitting grant proposals to upgrade our 2M equipment to be better
> integrated into the ARES net system here. On the other hand our ARES usually
> also does check ins on 28.400 MHZ which is not open on my K3. Not reasonable
> at all, hence my hope to scale things up. Our ARES group has done ARES/RACES
> certification to qualify for participation. I'll touch in with our club to
> see where we are regarding our RACES commitment. In the mean time also I'll
> make contact on my own. Thanks.
>
>
>
>     
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mzilmer at roadrunner.com

-- 
"A delay is better than a disaster."
-- unknonwn

Matt Zilmer, W6NIA
[Shiraz]