[Elecraft] KPA1500 Enhancement

[Matthew Cook]

If that were to happen then adding a second 15-way connector at the same
time to said module to allow two K3/K3s to drive the one amp through each
respective antenna input and matched output would start this amp towards
the "basic" SO2R path.  From there a smart 2x6 antenna switching unit some
well designed BPF filters and your well on your way.  The rest of the magic
is then just firmware (says he that writes said firmware every day) within
the upgraded processor the KPA1500 has been blessed with.

I'm fingers crossed..

73

Matthew
VK5ZM

On 26 April 2017 at 22:37, Thomas Donohue <tomdon92 at gmail.com> wrote:

> Hi to all:
>
> Wayne or Eric. Are there any plans or thoughts about adding a second RF
> input to the amp, similar to what the Yaesu VL-1000 has?
>
> Best 73,
> Tom/W1QU
>
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk5zm at bistre.net
>