[Elecraft] Older option boards from K3 upgrade

[Michael Stringfellow]

Guy:

All noted.  I just hate to trash perfectly good boards when there might 
be someone who could use them.

Not everyone will need the latest KXV3 if they're not too bothered about 
ten and six meters and it's possible someone could even use an old 
synthesizer board.  They are still installed in the majority of K3 rigs 
out there and, as others note, work perfectly acceptably for most users.

Mike


On 4/25/2017 1:14 PM, Guy Olinger K2AV wrote:
> I tossed my old synthesizers, in accordance with my dropping my old
> closet hoarder policy of keeping any and all for 40 years to see if it
> might be of any use. I actuarially doubt I will see another 40 years.
>
> The synthesizer mod has met with such documented success, that I
> routinely advise someone looking for a used K3 not to bother unless
> the new synthesizer(s) are in it. Or to work a discount on any K3
> without them to offset the cost of the synthesizer(s) to be done
> immediately.
>
> All this became apparent very early on after the new synthesizers were
> introduced.
>
> Anyone who is adding a KRX3 sub RX to a K3 which still has the old
> Synth for the main RX, I tell them to do the synth mod right then,
> because the easy time to do that is when the space for the sub RX is
> not occupied.
>
> A fully modded K3 is an awesome piece of used electronics, a very good
> value. I have noted, watching eBay and sales via this reflector, that
> compared to the overall K3 count of nearly 10,000, that only a small
> percentage in the low single digits appear to have come up for sale
> overall. These days you see one for sale every one or two weeks, which
> goes quickly. 25 to 50 units for visible sale out of a universe of
> 10,000 is a tiny number less than 1%.
>
> I'm sure there are more than that which trade privately. People sell
> their K3's to friends and members of their own radio club.
>
> I haven't done the new board that has the built-in sound card and USB
> interface. That's because I already have all the stuff working and
> debugged to do all those functions without that board, such as true
> serial cards in my PC etc. If any of that stuff gets zinged (not
> hoping for that), leaving others in a questionable state, I'll do a
> wholesale switch to the USB upgrade and remove some number of cables.
> Buying a K3S outright requires a financial negotiation with the war
> dept, and is highly unlikely unless fire or lightning has turned my K3
> into an insurance reimbursement.
>
> In the meantime, my limiting factor is better 160m RX antennas to feed
> the remarkable sound-stage diversity possible with the K3/K3S, made
> even better with the new synthesizers.
>
> All this contributes to the effectively zero value of the old synthesizers.
>
> 73, Guy K2AV
>
>
>
> On Tue, Apr 25, 2017 at 12:36 PM, Michael Stringfellow
> <stringmike1 at gmail.com> wrote:
>> I successfully upgraded my late model K3 with the new synthesizer board
>> (KSYN3A) and KXV3B and have the removed boards with hardware. I guess there
>> may still be some demand for these - is this a good place to ask?
>>
>> Mike
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k2av.guy at gmail.com