[Elecraft] KPA 1500 - SO2R

[Bill Frantz]

My most wonderful and understanding wife has requested that the 
number of "wires" coming into the house be minimized. To 
accommodate her wishes, I have an external antenna switch. It 
would be very nice if all the Elecraft tuners could take an 
externally provided antenna ID to use to recall the antenna 
tuning parameters. A 4 bit "band ID" would be ideal, but a 
command over the RS-232 interface would also work.

73 Bill AE6JV

On 4/25/17 at 7:50 AM, n6kr at elecraft.com (Wayne Burdick) wrote:

>KPA1500 firmware will be updated to fully support such products 
>as we identify them. We oversized the microcontroller memory by 
>a factor of about 8 to allow for such expansion. In addition to 
>SO2R, there may be other gear such as antenna switches that we 
>can directly control from the amp’s antenna and ATU switches, 
>and status can be shown on the 32-character LCD.

-------------------------------------------------------------------------
Bill Frantz        | Airline peanut bag: "Produced  | Periwinkle
(408)356-8506      | in a facility that processes   | 16345 
Englewood Ave
www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, 
CA 95032