[Elecraft] Feature request: Per antenna ATU mode memorization

[Nr4c]

Check the utilities for the various ATUs as I think some have this feature. 

Sent from my iPhone
...nr4c. bill


> On Apr 22, 2017, at 11:28 PM, David Orman <ormandj at corenode.com> wrote:
> 
> Hi,
> 
> Would it be possible on the KXPA100/KX3 combo (and K3*) to allow the ATU
> mode to be memorized per antenna? I have a small transmitting loop that is
> remotely tuned on ANT1 so wish to run with the ATU in bypass, but ANT2 is a
> EFHW which I like to have the tuner active (manual mode) for. I am wary
> I'll bump tune while I'm on ANT1 even after clearing match memory, thus not
> alerting me to a bad STL tuning solution, so having it in bypass makes a
> lot more sense, but I do sometimes flip to ANT2 to quickly see if signal is
> better and don't like having to re-enable the ATU.
> 
> Thank you,
> David Orman / K5DJO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com