[Elecraft] FW: Handles and feet - was KPA 500 vs New 1500 watt amp

[Clay Autery]

OK.....

1) For the "feet", find a supply of little discs of desired thickness
made from Sorbothane.
2) Buy the appropriate 3M Command strips..... removable.  Even if the
glue goes, it will come right off.

Or you can do the research and get the right glue chemistry for the
application and have it applied to the Sorbothane discs...

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/22/2017 12:32 AM, Erik Basilier wrote:
>  
>
>  
>
> From: Erik Basilier [mailto:ebasilier at cox.net] 
> Sent: Friday, April 21, 2017 9:45 PM
> To: 'Harry Yingst' <hlyingst at yahoo.com>
> Subject: RE: [Elecraft] Handles and feet - was KPA 500 vs New 1500 watt amp
>
>  
>
> Harry, I have considered doing the same. However, my experience with using the stick-ons is that the glue goes bad in a few years, and the foot falls off, leaving an ugly residue of glue.
>
>  
>
> From: Harry Yingst [mailto:hlyingst at yahoo.com] 
> Sent: Friday, April 21, 2017 8:35 PM
> To: Erik Basilier <ebasilier at cox.net <mailto:ebasilier at cox.net> >; 'Nr4c' <nr4c at widomaker.com <mailto:nr4c at widomaker.com> >; 'Clay Autery' <cautery at montac.com <mailto:cautery at montac.com> >
> Cc: elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net> 
> Subject: Re: [Elecraft] Handles and feet - was KPA 500 vs New 1500 watt amp
>
>  
>
> I put little stick on feet where two peices of gear may touch
>
>  
>
>  
>
>  
>
>  
>
>
>
> -------- Original message --------
> From: Erik Basilier <ebasilier at cox.net <mailto:ebasilier at cox.net> > 
> Date: 2017-04-21 10:59 PM (GMT-05:00) 
> To: 'Nr4c' <nr4c at widomaker.com <mailto:nr4c at widomaker.com> >, 'Clay Autery' <cautery at montac.com <mailto:cautery at montac.com> > 
> Cc: elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net>  
> Subject: Re: [Elecraft] Handles and feet - was KPA 500 vs New 1500 watt amp 
>
> As the number of Elecraft boxes on my shelf has grown, what I have long
> feared has recently happened: The handle on one box (or probably a screw on
> the handle) created a small scratch on the nude side of neighboring box. It
> looks like the KPA1500 handle design is unchanged. Maybe it is time for an
> upgrade of the handle design, or maybe we could use a kit of add-on feet or
> spacers?
>
> 73,
> Erik K7TV
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Nr4c
> Sent: Friday, April 21, 2017 7:44 PM
> To: Clay Autery <cautery at montac.com <mailto:cautery at montac.com> >
> Cc: elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net> 
> Subject: Re: [Elecraft] KPA 500 vs New 1500 watt amp
>
> It's for carrying and the little feet keep the case from getting scratched. 
>
> There's no space or - in Elecraft products.  
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Apr 21, 2017, at 6:35 PM, Clay Autery <cautery at montac.com <mailto:cautery at montac.com> > wrote:
>>
>> Cannot wait to get a look inside....
>>
>> There IS a handle on the left side (as you look at it).  I don't know 
>> if the small feet on the right side are for vertical orientation or to 
>> prevent the total blockage of the vents if shoved up next to another 
>> K-line product OR the power supply box...
>>
>> ______________________
>> Clay Autery, KY5G
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hlyingst at yahoo.com <mailto:hlyingst at yahoo.com> 
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cautery at montac.com