[Elecraft] Sub Receiver & KBPF3

[Bob Novas]

Messing with the sub-receiver is such a PITA that I will procrastinate
putting a new filter in for weeks before I gather the courage to pull it
apart.  

Bob W3DK

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of George
Thornton
Sent: Wednesday, April 19, 2017 3:21 PM
To: Clay Autery; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Sub Receiver & KBPF3

I have built several kits of all kinds going back to Heathkit days and I
built my own K2.

I had a lot of problems with the sub-Rx installation.  I have big hands and
could not seem to be able to see to line things up properly, not to mention
the pesky TMP connectors.

I am at the point with this where I will no longer attempt any mod that
requires removal of the Sub-Rx.  Everything goes back to the factory.

From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Clay
Autery
Sent: Wednesday, April 19, 2017 12:08 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Sub Receiver & KBPF3

Funny.... IMO, some of the best design work I've ever seen....
especially considering the package volume vs. modularity and capability.

However, I WILL confess....

I now own my own TMP tool, TMP connectors, coax stock, and assorted second
end connectors in case I need/want to make one of those cables...

I have not yet needed to make a cable for my own use. But I've made a bunch
for other folks,

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/18/2017 10:58 PM, Christopher Hoover wrote:
>> The TMP cables were in the way and sub-receiver box was a bit 
>> difficult getting the SUBIN and SUBOUT boards to align and mate properly.
>
> I installed mine myself too. (And I just r/r recently with the 
> addition of the gen coverage bp filters on the main board.) It is 
> certainly fiddly. The mechanical design leaves much to be desired.
>
> 73, Christopher AI6KG.
>
> On Sun, Apr 16, 2017 at 4:27 AM, wa9fvp
<repair at willcoele.com><mailto:repair at willcoele.com%3e> wrote:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to
gthornton at thorntonmostullaw.com<mailto:gthornton at thorntonmostullaw.com>

________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to bob.novas at verizon.net