[Elecraft] Recording Line Out on the K3

[Jorge Diez - CX6VM]

Hello

how do you control TX output for the recording?

I am doing some tests, I have LIN OUT = 10 and is recording properly what I
RX on MAIN and SUB receivers.

But my TX on the audio file, is to high compare with RX recording

With LIN OUT = PHONES and MON = 10 is OK, but i dont like to have monitor
when doing SO2R or SO2V

thanks,
Jorge
CX6VM/CW5W



2017-02-26 21:22 GMT-03:00 Dave Fugleberg <dave.w0zf at gmail.com>:

> Thanks Bob, that was it (I was at MCU 5.50). Updated to latest and changed
> LIN OUT back to NOR, and it works exactly how I wanted.  I also found a
> powerpoint presentation out on the web that you did for CTU on the subject
> of recording contest audio - very informative.  Thanks!  Guess I need to
> make more of an effort to watch for firmware updates- this radio keeps
> getting better and better.
> 73 de W0ZF
>
> On Sun, Feb 26, 2017 at 12:33 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
> > The problem of no TX Monitor audio on LINE OUT was fixed last July, in
> MCU
> > firmware 5.51, DSP 2.88.
> >
> > What version of firmware is your K3 running?
> >
> > 73,
> > Bob, N6TV
> >
> >
> > On Feb 25, 2017 7:50 PM, "Dave Fugleberg" <dave.w0zf at gmail.com> wrote:
> >
> > I have Line Out of the K3 connected to Line In on one of my soundcards.
> The
> > only way I've been able to record both sides of the QSO is to set the K3
> > Line Out to PHONES and turn up the MONitor to make it relatively equal in
> > volume to the received audio. This works, but it's annoying to have the
> > monitor that high, plus it means the Line Out level follows the AF Gain
> > control rather than being fixed level.
> >
> > Is there any way to get both transmit and receive audio mixed on Line Out
> > at a fixed (and relatively similar) level?
> >
> > 73 de W0ZF
> >
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jorge at gmail.com
>



-- 
73,
Jorge
CX6VM/CW5W