[Elecraft] OT - operating QRP at same park

[John Hendricks]

Band pass filters on both radios will solve this problem.

John K7JLT

On Apr 16, 2017 09:45, "kevino z" <z_kevino at hotmail.com> wrote:

> A friend and I both had our KX2 transceivers and some resonant end fed
> antennas. He was on 15m and I was on 20m. Our antennas were placed about
> 30-40 feet apart, as slopers with the radiating ends up 30+ feet in the air
> using Jack-kite poles. The plane of the antenna's slope were perpendicular
> to each other.
> We were both on 10w SSB.
>
> Every time one of us keyed up, the other person's KX2 would experience a
> nasty noise from the signal. Pre-amp was off, as was attenuator. My
> question is this: Would the use of some bandpass filters have helped us?
> This is a situation we are trying to resolve before operating QRP in a
> similar park for a QSO party.
>
> If more distance between the antennas would have helped, what is the
> proper way to determine the needed separation?
>
> I read the other day about someone in a car using 3 or 4 Elecraft radios
> with antennas on the roof, so I imagine there has to be a way.
>
> Thanks,
> -Kevin (KK4YEL)
>
>
> No trees were killed in the sending of this message. However, a large
> number of electrons were terribly inconvenienced !
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k7jltextra at gmail.com
>