[Elecraft] [K3][SOLVED] No Power out, no sigs in

[Martin]

Elecrafters,
thanks a lot for the replies, especially K9ZTV, W1OH and K6NV.

Did some tests like plug one leg of the ladderline directly into the 
so239 socket, hooked the receive-antenna to RX IN or AUX... Still No RX.

Swapping the K3SYNA boards brought both rx and tx back to life.
What puzzles me ist the fact that the SUB-RX also works fine.
So both K3SYNA boards seem OK. Initially i assumed the Main K3SYNA is 
defective.
Maybe something had gotten loose or lost contact the moment i checked 
the antenna match, dunno.

One more thing: The moment i removed the temp cables from the K3SYNA 
boards i forgot their correct positions. (Always take a picture with 
your mobile phone before you rip things apart)
  Unfortunatelly, 
http://www.elecraft.com/manual/E740126A%20KRX3A%20Subreceiver%20Installation%20and%20Operation%20Rev%20H2.pdf 
doesn't work right now, so can i assume that i plugged all cables 
correct, now that my K3 works again?.


-- 

73, Martin

Ohne CW ist es nur CB...