[Elecraft] KX2 - How to enable CW decode mode

[Don Wilhelm]

Larry,

Welcome to the Elecraft reflector and congratulations on your new KX2.

You may be confusing CWT with Text Decode - they are different things.

CWT is a tuning indicator only which displays how close your VFO is 
tuned to your sidetone pitch.

For Text Decode, read the Text Decode and Display section of the manual 
on page 29.  Note that Text Decode is only for CW, PSK D and FSK D.  It 
does not work in DATA A or AFSK A data submodes, those are normally used 
with a software application in soundcard data modes.

73,
Don W3FPR

On 4/10/2017 5:03 PM, hb9eyq wrote:
> New KX2 owner.  I'm able to select PSK, FSK, AFSK, and DATA (what ever data
> is for) using the DATA button but no CW decode option.  I can use the mode
> button to select CW but there is no decode text where VFO B is and the
> manual section that describes how to enable CWT has me jumping between pages
> with no explanation of how to enable it.  I've searched this forum (also new
> to this forum) for CW decode but didn't turn up anything for KX2.  When in
> CW mode I hold down the DATA button and I do get the "DEC OFF" but I don't
> get any "DEC ON" or any "T" icon.  I'm also new to Elecraft's front panel
> operation.  I've just upgraded the firmware to the latest on the Elecraft
> site.
> 
> Thanks
> 
> HB9EYQ
> Larry
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KX2-How-to-enable-CW-decode-mode-tp7629228.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>