[Elecraft] RS232 port selection

[bill steffey]

while i have been successful using MicroHam  MK2R's virtual serial 
ports for upgrading, AFTER tuning the port CAT connection emulation 
to none from Elecraft K3......Now I use a serial hard switch and 
flipping the P3/K3 from the microham  to another hard serial poert at the CPU.
Joe ( microham) emphatically tell us to NOT to upgrade thru the MicroHam
It's so great when this all works as intended.

bill

At 07:13 AM 4/5/2017, Don Wilhelm wrote:
>Alan,
>
>Yes, turning LP-Bridge off and connecting K3 Utility the the COM 
>port that is directly connected to the K3 is not only reasonable, 
>but necessary.
>
>73,
>Don W3FPR