[Elecraft] Elecraft K2 IF Amp issue and loking for advice

[Don Wilhelm]

Cameron,

There is nothing in that circuit that would have zapped L34.  I would 
just replace the inductor.

If you do not have good de-soldering equipment, L34 may be difficult to 
remove.  I suggest destroying the present inductor if you have to, and 
take it out one pin at a time (get the shield off first, then work on 
the inductor).
Be careful not to damage the thru-plated holes in the RF Board, or you 
will be in for a circuit re-wiring task.

73,
Don W3FPR

On 4/4/2017 4:49 PM, Cameron Francey wrote:
>

> Should I just request L34, or is there something else I may need from others past experiences?
>