[Elecraft] K3 microphone settings

[Matt Zilmer]

Both High/Low mic gain and bias settings are set by and recalled by port.

73,

matt W6NIA


On 4/2/2017 8:34 AM, Jim Miller wrote:
> I wanted to have two headsets connected, one front and one rear.
> Different settings including bias.
> Can bias be set via macro also is it set individually by port?
> Thanks, Jim KG0KP
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom
> Sent: Saturday, April 01, 2017 7:03 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 microphone settings
>
> This will select the Front Mic and set compression to 20 and  Mic Gain to
> 13:
>
> MG013;CP020;MN053;DN;DN;MN255;
>
> This will select the Rear Mic and set the Mic Gain to 9 and Compression to
> 20:
>
> MG009;CP020;MN053;DN;DN;UP;MN255;
>
>
> 73,
> Tom - KQ5S
>
> On Sat, Apr 1, 2017 at 6:16 PM, Alan. G4GNX <g4gnx at theatreorgans.co.uk>
> wrote:
>
>> I have tow microphones I'm using with my K3. One is part of the Yamaha
>> CM500 headset, plugged into the rear panel and the other is a Kenwood
>> MC-50 desk model, plugged into the front panel.
>>
>> To save using multiple menu changes to swap between the two, I will be
>> writing a macro to use one or two buttons to implement this.
>>
>> My problem is that each microphone requires a different gain setting
>> and when manually changing the menu settings between front and rear
>> panel, the gain settings don't track and have to be set separately on
>> the front panel gain control for each microphone.
>>
>> Does anyone know if it's possible to change the mic gain setting as
>> part of a macro and possibly compression levels as well?
>>
>> 73,
>>
>> Alan. G4GNX
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> nineback at gmail.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to jimmiller at stl-online.net
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mzilmer at roadrunner.com

-- 
"A delay is better than a disaster."
-- unknonwn

Matt Zilmer, W6NIA
[Shiraz]