[Elecraft] Amplifier thought: antenna tuner seldom needed with LDMOS amp

RLVZ at aol.com RLVZ at aol.com
Sat Apr 1 23:38:18 EDT 2017


As was posted on the Amps reflector a few months back:
 

> The LDMOS devices are designed to tolerate 65:1 SWR, 3:1 probably

> wouldn't be a problem so where is the need for a tuner?

 
Most ham antennas don't exceed 3 to 1 SWR even on the band  edges.  New 
amps that are constructed with LDMOS finals should be  able to handle nearly 
all antennas without a tuner.  
 
Operating a legal limit amp into an antenna with an SWR greater  than 3 to 
1 should be avoided for many reasons, such  as: poor radiation efficiency, 
harmonics, RF in the shack, RFI,  etc.  
 
73,
Dick- K9OM       
 
 
 
In a message dated 4/1/2017 8:48:28 P.M. Eastern Daylight Time,  
elecraft-request at mailman.qth.net writes:

Date:  Sat, 1 Apr 2017 12:03:01 -0500
From: K9MA  <k9ma at sdellington.us>
To: elecraft at mailman.qth.net
Subject: Re:  [Elecraft] Amplifier Thoughts
Message-ID:  <ecc6e608-42ae-aca5-9313-241a880dc794 at sdellington.us>
Content-Type:  text/plain; charset=windows-1252; format=flowed

On 4/1/2017 09:22, John  Perlick wrote:
> In the case of a solid state amp, the output is matched  to 50 Ohms or 
so.  Period.  So any mismatch means that RF is  reflected back into the 
amp....where it is converted into heat.    Depending on your SWR, that could be 
substantial!  So let's say 3:1. Then  25% of the power is reflected.   Note: 
at 10:1 you reflect 67% of  the power so that means 500 W reaches your 
antenna and 1000W is dissipated in  the Drain-Source junctions of your expensive 
RF transistors!
Clearly, a  practical solid state amplifier capable of tolerating, say, a 
3:1 SWR  needs an autotuner.  (Very few of us have the luxury of 
perfectly  matched antennas across all bands.)  That said, the autotuner 
should  permit maximum flexibility, including multiple settings for the 
same  band.  There should also be an easy way to change settings, so the  
amplifier can be easily integrated into the station control  system.

73,

Scott   K9MA



More information about the Elecraft mailing list