[Elecraft] K3 microphone settings

[Tom]

This will select the Front Mic and set compression to 20 and  Mic Gain to
13:

MG013;CP020;MN053;DN;DN;MN255;

This will select the Rear Mic and set the Mic Gain to 9 and Compression to
20:

MG009;CP020;MN053;DN;DN;UP;MN255;


73,
Tom - KQ5S

On Sat, Apr 1, 2017 at 6:16 PM, Alan. G4GNX <g4gnx at theatreorgans.co.uk>
wrote:

> I have tow microphones I'm using with my K3. One is part of the Yamaha
> CM500 headset, plugged into the rear panel and the other is a Kenwood MC-50
> desk model, plugged into the front panel.
>
> To save using multiple menu changes to swap between the two, I will be
> writing a macro to use one or two buttons to implement this.
>
> My problem is that each microphone requires a different gain setting and
> when manually changing the menu settings between front and rear panel, the
> gain settings don't track and have to be set separately on the front panel
> gain control for each microphone.
>
> Does anyone know if it's possible to change the mic gain setting as part
> of a macro and possibly compression levels as well?
>
> 73,
>
> Alan. G4GNX
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nineback at gmail.com
>