[Elecraft] Lp.pan & k3s

[Mark E. Musick]

And don't forget to turn the IF OUT switch on the P3 from OFF to ON.
Don't ask how I know.

Mark, WB9CIF


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Friday, September 23, 2016 11:08 PM
To: MaverickNH <cbjesseeNH at comcast.net>; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Lp.pan & k3s

Bret and Paul,

If you have the P3, connect the LP-Pan to the IF OUT on the P3. If you have
only the K3 (K3S), connect LP-Pan directly to the IF output of the K3.

The "rest of the story" is related to LP-Pan and your soundcard and your
computer and the computer applications and is appropriate discussion on the
LP-Pan Yahoo group.  There is a lot of setup information at Larry's website
www.telepostinc.com.

73,
Don W3FPR

On 9/23/2016 5:41 PM, MaverickNH wrote:
> Hi Paul,
>
> I was just getting around to asking the same question and wonder if we 
> might merge efforts? I have a K3S and P3 with a new LP-PAN 2, hoping 
> to get it working with a ASUS Xonar U7 external sound card and NaP3 
> software. From there, on to LP-Bridge and CW Skimmer. But if you have 
> other hardware/software thoughts, I'll hold off.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to markmusick at sbcglobal.net