[Elecraft] K3S Upgrades

[Mark E. Musick]

Hi Geoff,
I have built two K3/100s and one K3S/100. All three with a KAT3/KAT3A.
Knowing how tight it is putting in the KAT3/KAT3A, I would install that
first. Then the KPA3 and the K144V last.
I have never installed a K144V, but I suspect you have to install the KPA3
before the K144V.

Mark, WB9CIF

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Geoff
Sent: Sunday, September 18, 2016 9:53 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3S Upgrades

Perhaps a simple question but I am a new Elecraft user.

I have a 10 Watt K3S, (obtained pre built) together with*the****following
three upgrade options ready to be installed; *100W automatic antenna tuner
(KAT3), 100W PA stage (KPA3) and 2m option (K144XV).

Is there any preferred order to install them? Left to my own devices I would
probably start with KPA3, and finish with the K144XV, and I am also
wondering whether to re-assemble and test between the addition of each
module.

Thanks,

73, GeoffG1WRH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to markmusick at sbcglobal.net