[Elecraft] KPA500 Stopped working on 40

[Robert Biamonte]

Thanks Mike for the quick response!  Ant 2 was selected for 40m. 
Ant 2 is my dummy load which I may have selected during the testing of the new Windom antenna.  All is well with the ether now.  *G*

very 73
Rob W3OMW

> On Sep 17, 2016, at 8:37 PM, Mike Flowers <mike.flowers at gmail.com> wrote:
> 
> Hi Rob,
> 
> One of my embarrassing errors is that the K3's ANT selection is by band - so
> if you've inadvertently selected ANT2 for 40M, etc. no 40M RF may be getting
> to the KPA500.
> 
> Seems very odd that just 40M is not working.
> 
> Just a thought.
> 
> - 73 and good DX de Mike, K6MKF, Past President - NCDXC 
> 
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> Robert
>> Biamonte
>> Sent: Saturday, September 17, 2016 5:24 PM
>> To: elecraft at mailman.qth.net
>> Subject: [Elecraft] KPA500 Stopped working on 40
>> 
>> Hello,
>> Yesterday all was fine, and today the KPA500 will not transmit on 40m.
>> All other bands show normal operation and output. It is connected to a K3.
> Any
>> thoughts before I open the covers?
>> 
>> 73,
>> Rob W3OMW
>> 
>> _____________________________________________________________
>> _
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> Message
>> delivered to mike.flowers at gmail.com
>