[Elecraft] KXPD2 paddle problem

[Peter LaBissoniere]

I have the same issue. I'm thinking the little screws are too small to handle the constant side "attack" pressure of keying from higher up on the posts. I'm afraid I will crack the lexan/plastic if tightened to much and won't help for long anyway. Seems they should have also been secured at the top?

Sent from my iPhone

> On Sep 16, 2016, at 1:00 PM, Converse, Robert <robert.converse at finnegan.com> wrote:
> 
> A few weeks ago there was some discussion regarding the contact posts coming loose on the KXPD2 paddles.  I keep experiencing this problem, and can't keep the philips screws on the posts tight for long enough to get through a QSO.
> 
> I'm reluctant to overtighten the screws or use Loc-tite, and wonder if anyone has a fix for this problem.  I would prefer to avoid loss of use of the paddles for the two-week round trip time to the factory and back to Maryland.
> 
> Bob, WO3E
> 
> 
> 
> This e-mail message is intended only for individual(s) to whom it is addressed and may contain information that is privileged, confidential, proprietary, or otherwise exempt from disclosure under applicable law. If you believe you have received this message in error, please advise the sender by return e-mail and delete it from your mailbox. Thank you.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kw9e at wi.rr.com