[Elecraft] KX3 SDR MAC

Michael Blake k9jri at mac.com
Wed Sep 14 15:30:26 EDT 2016


Fred, If you have the PigRemote it will serve as the RS-232 connection from iSdr to the KX3.  If you do not then then just set the frequency on iSdr to 0 (zero) kHz and the frequency you are tuned to will be at center screen and other signals will be displayed as plus or minus kHz.  It works quite well… very well actually.

I use an Apple camera adapter (lightning to usb) with a Griffin iMic to connect from the I/Q jack on the KX3 to the iPad.  It works just as well on the iPhone with a smaller display.

If you want other stuff like CAT, Log, LOTW support,  DX-Cluster, etc. look at RumLog NG running on your Mac.

Michael Blake
k9jri at mac.com <mailto:k9jri at icloud.com>






> On Sep 14, 2016, at 3:04 PM, Fred Moore <fred at fmeco.com> wrote:
> 
> I am aware it doesn't require any SDR software, but wanted to play with
> some.. primary for a panadapter, without adding on a PX3..  I have not
> looked at iSDR for ipad.... will take a look at it..  thanks.. Fred
> 
> 
> On 9/14/16 2:54 PM, Michael Blake wrote:
>> Fred, what is your goal?  The KX3 does not require any SDR software.
>> Panadapter, try iSDR on the iPad.  If you have a PigRemote it will
>> even display the KX3's frequency.  It connects to the I/Q jacks.
>> 
>> Fill us in what functions you are looking for.
>> 
>> Michael Blake
>> k9jri at mac.com <mailto:k9jri at mac.com>
>> 
>> On Sep 14, 2016, at 14:39, Fred Moore <fred at fmeco.com
>> <mailto:fred at fmeco.com>> wrote:
>> 
>>> I am looking for recommendations on a good SDR application that will run
>>> under Mac OSX.   I also have parallels installed with a windows VM, but
>>> don't want anything that runs under windows..
>>> 
>>> What are you Mac users using?..   Fred
>>> 
>>> 
>>> -- 
>>> Fred Moore
>>> WD8KNI
>>> email: fred at fmeco.com <mailto:fred at fmeco.com>
>>> 
>>> phone:  321-217-8699
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k9jri at mac.com <mailto:k9jri at mac.com>
>> 
>> -- 
>> This message has been scanned for viruses and
>> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
>> believed to be clean. 
> 
> -- 
> Fred Moore
> email: fred at fmeco.com
>       fred at safes.com
> phone:  321-217-8699
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9jri at mac.com



More information about the Elecraft mailing list