[Elecraft] CW Monitor audio lost on Line Out after upgrade of FW release in my K3

[George Kidder]

Ditto.  Essentially the same problem here on upgrading to 5.50. I have 
not been as comprehensive in my analysis as Classe was, but essentially 
the same findings.  What it means is that fldigi (for instance) can no 
longer decode CW keyed into the K3, which it used to do.

But it's nice to know that the problem seems to be a new "feature"!

George, W3HBM


On 9/8/2016 11:40 AM, Classe Bergman wrote:
> Hi,
> Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
> 5.50/2.87
> I then discovered that the CW Monitor audio was lost on Lin Out. First I
> tought  that some settings was messed up but could not find anything. I
> then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
> found that if I change settings from LIN OUT = "Nor"as I normaly use  to
> "=Phones", the CW Monitor audio comes back. So something have changed the
> function of Line Out audio in the new FW release.
> Since all audio levels follows the Front AF vol  when using  "=Phones" this
> mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO
> board without USB interface
>
> Is this a known bug ( or maybe a feature ..) ?
>
> 73 Classe SM3GSK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gkidder at ilstu.edu