[Elecraft] K3/0 mini usb port

[Don Wilhelm]

Jeff,

How many DE-9 connectors are there on your USB to serial adapter?
If only one (which is normal), then only one COM port should be defined.
That fact that you find 2 COM ports in device manager is cause for 
question unless you have an adapter with 2 physical serial ports.

Don W3FPR

On 9/3/2016 10:03 AM, Jeff Griffin wrote:
>   I'm at FTDI 2.12.18.0,
> I think this is the right level. There are no errors reported in any of the
> comport properties menu's. When I plug the USB cable in, com ports 5 and 6
> appear in the device manager list. All looks normal. My DXLab commander
> setup is. K3, com 5(I also tried 6),38400{same as K3/0),8,N,2,Y,Y.
> interrogate  and enable are checked.
>
> Anyone have any ideas, and can someone verify what level FTDI driver there
> using that works. Thanks.
>
>