[Elecraft] K3 Mini Error question

[Barry Baines]

Jim:

If the K3-Mini is powered up through RRC but the ’target’ K3/K3S is not powered up and online, you’ll get a warning signal. This means that the mini is not ’seeing’ the host transceiver.

Power up the K3/K3S and see if that doesn’t resolve the issue. If you’re still having issues, then check your cables for proper connection and that you indeed have internet between the K3-Mini site and the K3/K3S.  

Hope this helps,

Barry Baines, WD4ASW
Westborough, MA (residence)
Folkston, GA (ham station)


> On Oct 29, 2016, at 5:26 PM, Jim Cary <jimlcary at gmail.com> wrote:
> 
> I just packed up both my control and remote systems and moved them down to my ZF QTH, where they will be permanent.
> 
> I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up the remote unit yet/
> 
> When I powered up the mini, and turned the volume control I got a three tone warning signal.  The light over the aux/mic cable is flashing yellow, which according to the Remote Rig manual means the SIP connection has failed…. but it isn’t clear what that means or what to do about it.  I’ve checked and doubled checked all the connections and they look good.
> 
> Does anyone not in the CQ contest (!!!) have an idea?
> 
> Jim
> W2SM
> ZF2LC
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bbaines at mac.com