[Elecraft] KX3 & RMS Express - T R latency

[Barry]

Dave,
     Interesting problem. I used used RMS Express, but I used a SignaLink 
USB for interface and T/R. I had no problems this way. Everything seemed 
to work as I would have expected.

73,
Barry
K3NDM

------ Original Message ------
From: "Dave" <dave.phelps at gmail.com>
To: elecraft at mailman.qth.net
Sent: 10/29/2016 12:32:52 PM
Subject: [Elecraft] KX3 & RMS Express - T R latency

>Howdy,
>I'm using an old laptop to connect my KX3 to winlink system.  Using the
>KXUSB for control, and laptop soundcard jacks to KX3 phones and mic 
>jacks.
>Works fine, except that RMS Express gives me a Timeout message for T-R
>latency - apparently my T - R switching is too slow?  Any suggestions 
>on
>what to change to help this out?
>Using DATA-A, ALC off
>On my old full size rig I used a signalink to interface and I just 
>cranked
>the delay knob full CCW which did the trick - since I'm not using the
>signalink here I'm at a loss - no easy knob to turn!
>Thanks,
>Dave
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net