[Elecraft] KAT-500 Not Attempting to Tune

[Nr4c]

Be sure KAT500 is ON before powering up the K3. 

Sent from my iPhone
...nr4c. bill


> On Oct 24, 2016, at 9:05 PM, Byron Peebles <NZ3O at arrl.net> wrote:
> 
> When I powered on the station tonight, I noticed nothing unusual, except I had no power out.
> 
> My KAT-500 makes no attempt to tune when I use the K3S tune button.
> 
> I've checked all cables, updated KAT firmware, restored configuration, no change.
> 
> When I first received this in 2015, a power-cycle solved this, but not this time.
> SWR fluctuates 11-20 on the K3S display.
> 
> Any ideas?  All other functions seem to work, except this rather important one.
> 
> CQWW SSB this weekend.  I need this working.
> 
> 73, Byron
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com