[Elecraft] KAT500 altered behaviour

[Jack Brindle]

Gary;

Be sure that the K3 is still set to output the data to the KAT500 over the Auxbus. 
On the K3, go to the KAT1 menu and tap the [1] button to toggle this setting on or off. If it has accidentally
been reset to Off, you won’t get the info from the K3. This procedure is better described on page 17
of the latest KAT500 manual.

Hope you get it going quickly! If not, we will do our best to make it happen.

73!

- Jack, W6FB


> On Oct 18, 2016, at 10:53 PM, Gary Gregory <vk1zzgary at gmail.com> wrote:
> 
> Got an interesting anomaly with KAT500 #007
> 
> Without making any changes to settings, cables, movement of equipment,
> AuxBus or RS232 cables etc, it now has stopped "following" on QSY.
> Band changes are working, first Dit will set tune to stored memory, checked
> the KAT500 utility, boxes for QSY/Tune on Auto and Manual are ticked.
> Manual and Auto tune works as expected and apart from the QSY feature I am
> at a loss to see what has changed other than the obvious, not following the
> VFO. Oh, and yes, I am on the correct VFO
> Reloaded previous saved config, no change.
> Any ideas anyone?
> Gary
> -- 
> 
> 
> 
> *Gary - VK1ZZ, K3NHLSkype: Gary.VK1ZZhttp://www.qsl.net/vk1zz
> <http://www.qsl.net/vk1zz>Motorhome Portable*
> *Miss Behavin'*
> 
> 
> *Elecraft K3KPA500FT  #18KAT500FT  #007*
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com