[Elecraft] K3S QST Article

[Wayne Burdick]

We sent an earlier posting showing which serial numbers already had the new upgrades:

   KPA3A upgrade incorporated starting with serial number:

       Factory assembled:  s/n 10852
       Kit:                s/n 10864

   LPA module upgrade incorporated starting with serial number:

       Factory assembled:  s/n 10920
       Kit:                s/n 10939

73,
Wayne
N6KR


On Oct 18, 2016, at 7:52 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:

> If the serial number is 10939 or greater, the change has already been installed.
> At slightly lower serial numbers (10852 and above) it may or may not have been installed - it depends on whether it is a kit or factory assembly and whether it is a K3S/10 or K3S/100.
> If you are in the 'questionable' serial number range, contact Elecraft support for detailed information.
> If below S/N 10852, the change has not been installed.
> 
> 73,
> Don W3FPR
> 
> On 10/18/2016 10:29 AM, Bob Steding wrote:
>> Is this there a SN after which these upgrades are automatically included in
>> all K3S's?
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com