[Elecraft] R: Re: K3S - K3 Noise Blanker and Noise Reductor

[Don Wilhelm]

Ian,

Your AGC SLP and AGC THR menu settings are contributing to the noise 
response of your K3S.
I recommend you increase the AGC THR setting and decrease the AGC SLP.
Look at my website www.w3fpr.com "Noisy K3" article.  It will give you 
guidelines for setting those AGC parameters to best deal with the 
ambient noise you have at your location.
Pay particular attention to the method of evaluating your changes. You 
must listen during pauses in a signal.  If you listen only to the noise, 
you will end up adjusting the wrong direction.

73,
Don W3FPR

On 10/13/2016 3:58 PM, glcazzola at alice.it wrote:
>
> in the CONFIG MENU I have:
> AGC DCY - nor
> AGC HLD - 0.00
> AGC PLS - nor
> AGC SLP - 012
> AGC THR - 005
> AGC-F - 120
> AGC-S - 020
>
>