[Elecraft] Soon to be an Elecraft(er)!

[Matt Maguire]

Does the factory do a full per-band calibration, or do they just calibrate on 20m and extrapolate? If the latter I'd suggest to do the full per-band calibration yourself even for a factory-fitted roofing filter, as it does make a difference (obviously back up your config first so you can restore to factory settings/calibration if needed)

73, Matt VK2RQ




On Fri, Oct 7, 2016 at 5:38 AM +1100, "Ray Sills" <raysills3 at verizon.net> wrote:










Also, IF you order the roofing filter for the KX3…. even with a kit purchase…. the factory will calibrate it for you, so all you need do is install the little board.  They have a test jig, so that the filter will be tested with YOUR particular main board.  Best of both worlds… save some money, and get free factory calibration.

73 de Ray
K2ULR
KX3 #211


> On Oct 6, 2016, at 12:00 PM, Walter Underwood  wrote:
> 
> The roofing filters require some calibration. If they are factory-installed, Elecraft does that for you. All the other options are exactly the same whether factory-installed or user-installed.
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to matt.vk2rq at gmail.com