[Elecraft] K-Pod Macro Question

[Ron D'Eau Claire]

Sorry, I left the trailing semicolons off after the last command in each
string, e.g. ...SWT14; not ...SWT14

Ron 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ron
D'Eau Claire
Sent: Wednesday, October 5, 2016 10:36 AM
To: 'paul ecker'
Cc: 'Elecraft'
Subject: Re: [Elecraft] K-Pod Macro Question

Hi Paul: 

Try this:

SWH14;UPMN097;SWT14
Enters the Config Menu, enables spkr+phones, leaves config menu. 

SWH14;DNMN097;SWT14
Enters Config menu, disables spkr+phones, leaves config menu. 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of paul
ecker via Elecraft
Sent: Wednesday, October 5, 2016 8:36 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K-Pod Macro Question

In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to
PF2 that allows me to switch  the speaker either on or off, even though
Ihave headphones plugged in. But I'll be darn if I can remember or figure
outnow, what the macro cmd would be so I can assign the same action to a
K-Podbutton. Can someone help?
73Paulkc2nyu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at cobi.biz

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at cobi.biz