[Elecraft] Tascam 122 and Windows 10

[Joe Subich, W4TV]

On 10/4/2016 6:38 AM, K9IR wrote:
> I have been using a Tascam 122 MKii as an outboard sound card with
> my K3 for RTTY. Initially the Tascam worked fine after upgrading the
> shack PC to Win10. Today, however, while I can decode RTTY, I cannot
> send any longer. I get an eZeroDivide error message from MMTTY when
> WinWarbler starts.

This is not a Tascam (sound card) issue.  The solution to this ha been
posted many times on the DXLab list.  It is an error in MMTTY.  To fix
it ...

1) close WinWarbler
2) Using Windows Explorer navigate to the DXLabSuite\WinWarbler
    directory
3) delete the file MMTTY.ini
4) restart WinWarbler
5) Select RTTY
6) Open CONFIG | RTTY and reset Mark Offset to -<PITCH> where PITCH
    is your PITCH setting in AFSK A and set Optimal Offset to
    [PITCH + 85].  If you are using DATA A, reset Mark Offset to <Pitch>

73,

    ... Joe, W4TV

On 10/4/2016 6:38 AM, K9IR wrote:
> I have been using a Tascam 122 MKii as an outboard sound card with my K3 for
> RTTY. Initially the Tascam worked fine after upgrading the shack PC to
> Win10. Today, however, while I can decode RTTY, I cannot send any longer. I
> get an eZeroDivide error message from MMTTY when WinWarbler starts.
>
> I understand officially the Tascam drivers ended with WinXP/Vista, but I had
> it working in Win7. I've tried using the Compatibility feature in Programs
> under Control Panel to no avail; the Tascam driver software seems to load
> but results are the same--no TX.
>
> I have verified VOX is engaged and the VOX gain set properly. This whole
> setup worked fine until today. I think there was an auto-update for Win10
> that installed since the last successful operation and suspect that killed
> the Tascam.
>
> Any ideas on how to jump start the Tascam into action? Or is it time to
> retire this piece of gear and get something else? Tnx!
>
> 73 Paula k9ir
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Tascam-122-and-Windows-10-tp7623087.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>