[Elecraft] New to the K3; ssb/cw question

[Ron Manfredi]

Thanks, Fred.   After reading your reply, I checked and finally did find 
this setting  in the Main menu; an awful lot of things to check!

73,

Ron  WA2EIIO


On 10/3/2016 2:48 PM, Fred Jensen wrote:
> It depends ... there's a menu setting [I'd tell you where except I'm 
> not at my K3 right now] to turn it on and off. There are some times 
> when it's advantageous to be able to send CW while in SSB modes ... 
> VHF contest comes to mind.
>
> 73,
>
> Fred K6DGW
> - Sparks NV DM09dn
>
> - Northern California Contest Club
> - CU in the Cal QSO Party 7-8 Oct 2017
> - www.cqp.org
>
> On 10/3/2016 11:41 AM, Ron Manfredi wrote:
>
>> I have been getting acclimated to my (new to me)  K3 and marveling over
>> its many ways to customize its operation.   Made some SSB contacts, and
>> decided to try CW.
>>
>> I connected my paddle, and did some quick tests on CW.   I have found
>> that even when I am in USB or LSB modes, keying the paddle causes the
>> rig to transmit cw.  This happens even  with the rig in the PTT mode on
>> sideband.  It this correct, or have I missed a setting somewhere?
>>
>> Ron  WA2EIO
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa2eio at optonline.net
>