[Elecraft] New to the K3; ssb/cw question

[Don Wilhelm]

Ron,

You likely have CW+SSB turned on.  It is one of the sub-functions of the 
CW WGHT menu.  Look at page 55 of the manual.  Tap [1] to toggle it on/off.
If you have an older manual, you will not see it - download a new manual 
from Elecraft.

73,
Don W3FPR


On 10/3/2016 2:41 PM, Ron Manfredi wrote:
> I have been getting acclimated to my (new to me)  K3 and marveling 
> over its many ways to customize its operation.   Made some SSB 
> contacts, and decided to try CW.
>
> I connected my paddle, and did some quick tests on CW.   I have found 
> that even when I am in USB or LSB modes, keying the paddle causes the 
> rig to transmit cw.  This happens even  with the rig in the PTT mode 
> on sideband.  It this correct, or have I missed a setting somewhere?