[Elecraft] [K3] FW 5.5 issue??

[Anthony Scandurra]

Jim,

I had the same problems.  Switched back to 5.38 and the problems went away.

I have not tried 5.52 to see if the problems were fixed.

73, Tony K4QE

On Sat, Oct 1, 2016 at 12:33 AM, Jim McDonald <jim at n7us.net> wrote:

> I installed K3 FW 5.50 to use my K-Pod, which I like very much.  I have a
> couple of weird problems using DXLab now that I can't explain and wonder if
> the new FW might be related.
>
>
>
> In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes the
> frequency in the K3 but it's 850 Hz higher than the frequency that DXLab
> sends to the radio.  I'm using K3 FSK D with 1275/1445 tones, NOT AFSK.
>
>
>
> I don't know if my other problem is attributable to the firmware either.
> DXLab's rig control module, Commander, has a nice feature (activated by
> clicking on a button in the VFO B panel) that will switch the radio to
> split
> and turn on the subreceiver (called "dual receive" in Commander).  It used
> to do both of those but now only turns on split but not the subreceiver.
>
>
>
> I'd very much appreciate someone also using FW 5.50 and DXLab would check
> to
> see if my experience is unique to me or not.
>
>
>
> Thanks.
>
>
>
> 73, Jim N7US
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to anthony.scandurra at gmail.com
>