[Elecraft] kpa500 cable
Jack Brindle
jackbrindle at me.com
Tue Nov 22 13:01:28 EST 2016
Page 18 of the KPA500 manual contains a table with the connections you need to make (and the pins you shouldn’t connect).
If you see conflicts with the DIGOUT1 causing the KPA500 to be disabled you may wish to remove the pin 11 connection.
73,
- Jack, W6FB
> On Nov 22, 2016, at 9:37 AM, NOEL POULIN <ve2fww at globetrotter.net> wrote:
>
> I am wiring a new cable for THE KPA500 FOR THE K3S
> Here are the pins I am using on a db15
>
> 2,3,4(NC),5,9 11,12,13,14
> I am not using pin10 ....keying the kpa ....with an rca cable
> I am not using pin 15... ALC
> I would like to know if my setting is ok.....like this
> Thanks
> NOel
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com
More information about the Elecraft
mailing list