[Elecraft] k3 remote

[Fred Jensen]

Well ... if your control position and the remote are in the same house, 
you could run a length of RG-58 from the remote K3S IF output to the P3 
near the K3/0 where you can see the screen.

That won't work for me, my control site is about 60 km +/- from the 
remote that actually makes the RF and has all the antennas.  Washoe and 
Storey counties won't give me an easement. [:-)

73,

Fred K6DGW
- Sparks NV DM09dn

- Northern California Contest Club
- CU in the Cal QSO Party 7-8 Oct 2017
- www.cqp.org

On 11/17/2016 8:34 AM, Barry Baines wrote:

>> I would have many questions to ask before ordering........I am
>> using the P3…and I was told that the P3 must be off when operarting
>> the k3 remote???.....
>
> Not true; the P3 can remain on (it will turn on if you have the power
> for the P3 supplied by the K3s).   However, you won’t have access to
> the P3 screen and buttons from the K3/O-Mini operating position in
> the other room.  This means of course that there isn’t much point
> having the P3 on anyway if using the K3/0-Mini in the other room.