[Elecraft] Low Line-In level

[Don Wilhelm]

Dragan,

Does the K3 still respond to microphone input as it did before?
If the answer is YES, then I would suspect the soundcard is the source 
of your problem.

73,
Don W3FPR

On 11/14/2016 12:48 PM, Dragan 4O4A wrote:
> I am an occasional user of digital modes.
> My K3 is conntected to my PCs via in-line-out cables.
>
> Usually, I used PC speakers gain to about 50-75% of max, and Line level on
> K3 was about 10 or so. ALC used to be 4 bars, with 5th bar flickering, or
> lower.
>
> Recently, I cannot setup line-in level as it was before.
> Even if I setup both PC audio to 100% and Line to max (60), I can hear very
> weak sound. VOX (DATA A) works properly, but audio signal is very weak.
> If I setup Monitor to max (60), I can hear sound but it is very "dirty".
>
> Where to start? :)
>
> Regards,
> Dragan, 4O4A
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Low-Line-In-level-tp7624013.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>