[Elecraft] K3 output power falls

[K9SW at comcast.net]

Thanks for the pointer, Fred.  With the book open to p.165, plus a couple of other menu adventures, I was able to get the K3 working like it should.  Don’t know how the settings were scrambled - something of a mystery.  

Best regards -

Dave K9SW


> On Nov 10, 2016, at 9:10 AM, Cady, Fred <fcady at montana.edu> wrote:
> 
> Hi Dave,
> Check CONFIG:KPA3.  It should be PA nor.
> Cheers,
> Fred KE7X
> 
> for all KE7X Elecraft books, see www.ke7x.com <http://www.ke7x.com/>
> 
> 
> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of K9SW <K9SW at comcast.net>
> Sent: Wednesday, November 9, 2016 11:49 PM
> To: Elecraft Elecraft
> Subject: [Elecraft] K3 output power falls
>  
> Maximum power output on my K3 dropped to 12 watts, for no discernible reason.   Any handy hints about what might cause this?  I haven’t yet taken it apart to check voltages, etc.
> 
> Dave
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
> Message delivered to fcady at montana.edu <mailto:fcady at montana.edu>