[Elecraft] R: Macro sequencing

[glcazzola at alice.it]

Fred, can you specify the macro for setting two different options of AGC, for example:
a) thr 10 - slp 5B) thr 6 - slp 12
I would like to set them both on PF2 and on different macros on K-Pod.
I have seen examples on your K3S book that I own  and on ham web pages. I have programmed split+2 on and off on PF1,  and on K-Pod, pwr 100 and pwr 65 (for driving amp), but dont understand how to set these values for AGC in a macro.
ThanksIan IK4EWX


----Messaggio originale----
Da: fcady at montana.edu
Data: 12-nov-2016 0.57
A: "elecraft at mailman.qth.net"<elecraft at mailman.qth.net>
Ogg: [Elecraft] Macro sequencing

We have seen some great macro ideas where a single function key is used to toggle between two different K3 states, e.g. in and out of split, toggling between two AGC THR settings, etc.  Unfortunately, this idea cannot be used (directly) with a KPod button.  Each of the the 16 KPod buttons are dedicated to a single macro and cannot be changed like the function key assignments can.


However, I just twigged onto the thought that you can assign a third macro to be activated by a KPod key that then toggles the macro sequence.  For example, if you use a hold of PF2 to toggle in and out of split, that uses Macro 7 and Macro 8 (say) you can assign SWH47; to Macro 9 and then tap the KPod F1 key to run Macro 7 and then Macro 8 in sequence.


Don't why I didn't think of it before or if I missed it when somebody else mentioned it.


have a good weekend all.

73,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to glcazzola at alice.it