[Elecraft] Remote operation flexibility

[Richard Hayman]

I am operating my K-3/100, KPA-500, and KAT500 successfully using a K3/0 at my residence with RemoteRig.

I’ve been asked to setup a station in a Public Library MakerSpace. The problem is the antenna and feed line. To keep the cost low, I am hoping to be able to use a PC Laptop runningTRX-Manager and a Remote Rig black box at the MakeSpace.

My question is a simple one. What changes do I need to make to the Remote configuration and jumpers to be compatible with two types of control methods.

At the moment, the TRX-Manager will not turn on the radio. I get two error messages: RTS and CTS are not available. J3 in the Remote Rig ties them together.

The solution needs to be a single configuration at the radio side to support control by both a PC with Control SW at the MakerSpace and the K3/0 at home.

Any help would be appreciated.

73, Dick, WN3R