[Elecraft] JT65 ON THE KX2

[Walter Underwood]

What??? That isn’t in any spec or manual for the KX2. Why 42 seconds? 

The KX2 manual says this, on page 27:

"5.0 watts or lower is recommended in all data modes. The KX2 will reduce power, if necessary, to maintain a safe operating temperature.”

http://www.elecraft.com/manual/E740282%20KX2%20owner's%20man%20A5.pdf <http://www.elecraft.com/manual/E740282%20KX2%20owner's%20man%20A5.pdf>

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Nov 6, 2016, at 4:46 PM, Nr4c <nr4c at widomaker.com> wrote:
> 
> Check manual for digital modes using DATA A submode. Watch power out as this mode has a 42 second 100% TX time. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Nov 6, 2016, at 11:31 AM, Robert 'RC' Conley <rc.kc5wa at gmail.com> wrote:
>> 
>> How is it accomplished?
>> 
>> -- 
>> May You Live Long and Prosper....
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org